wle200nx (wifi) - Wifi,Cellular(4G/5G)

wle200nx	802.11a/b/g/n miniPCI express radio
Status	Active,but not recommended for new designs. Chipset discontinued by Qualcomm.
Part numbers	wle200nx = Compex WLE200NX a/b/g/n miniPCI express radio card, I-Pex connectors
Use with	All noah/hart system boards ip1.pigsma pigtail (recommend two) sfat4 2.4 GHz wifi antenna or sfat5 dual band wifi antenna (recommend two)
Note	Wireless radio cards are ESD sensitive, especially the RF switch and the power amplifier. To avoid damage by electrostatic discharge, the following installation procedure is recommended: Touch your hands and the bag containing the radio card to a ground point on the router board (for example one of the mounting holes). This will equalize the potential of radio card and router board. Install the radio card in the miniPCI express socket. Install the pigtail cable in the cutout of the enclosure. This will ground the pigtail to the enclosure. Touch the I-PEX connector of the pigtail to the mounting hole (discharge), then plug onto the radio card. Use external lightning protection for outdoor applications. Qualcomm Atheros AR9280 I-Pex / u.fl connector Software support: Expect some pain, ath10k drivers required. Currently not supported by pfSense / OPNsense !
Data sheet	Compex WLE200NX
Compliance	FCC & CE. Intended for professional use.
Warranty	1 year
Origin	China